DataStream IoT CellPoint^®

DataStream IoT CellPoint^®is a cellular IoT data logging and event monitoring device, defies environmental challenges, enabling flawless data collection, predictive analytics, and real-time event detection: Make informed decisions when it matters most.

Monitor and data log devices in your system. Data and Alerts are automatically uploaded to a cloud data logging service. Alerts of events can also be sent via email or text. There are three version of the CellPoint data loggers:

Analog 4-20mA input

Examples:

• Pressure
• Flow Rate 
• Tank Level 
• Temperature 
• Chlorine, H2S, CO2 level or other chemicals
• Voltage
• pH 

Data readings can be captured at intervals from a few minutes, to hourly, daily. They can be uploaded 4 times a day to once a day.  

EVENT ALERTS: The high an low point of The analog signal can be programmed with a high and low even alert point. For example in pressure logging, low could be 20 PSI, and high could be 100 PSI. If either threshold is reached, an alert via email or SMS text can be sent within minutes to allow you to address the problem promptly.

Water Meter Encoder input 

Encoder output works with most brand meters with AWWA 3-wire Encoder output. This includes meters made by Zenner, Badger, Sensus, Neptune, Mueller/Hersey, Amco/Elster, Metron, Kamstrup, and others. 

The data logger can take readings at various programmable intervals and upload the data log. If  you don't have an AMI system with daily, or hourly reads, this can be helpful on district meters, plant meters, commercial meters, or placed  you need more frequest readings.

(AWWA UI01203 or Sensus Protocol)

Pulse input

A Pulse input version is available for older pulse type water meters, on/off event alerts such as monitoring startup of pumps and generators. It can also monitor switches that alert gate entry, tower ladder breach, and other plus or contact switch applications.